PPS (Polyphenylene sulfide) – mineral load
PPS+MI
PPS (polyphenylene sulphide) – mineral filler
Reinforced mineral charge
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.62 to 2.04 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 6 kJ/m2 |
| Flexural modulus | 5350 to 24000 MPa ISO 178 |
| Flexural resistance | 210 MPa |
| Tensile modulus | 4210 to 23000 MPa ISO 527-1 |
| Tensile resistance | 72.2 to 75.2 MPa ISO 527-1, -2, Break |
| Tensile strain | 0.50 to 1.7 % ISO 527-1, -2, Break |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Industrial applications
- Home appliances
- Electrical/Electronic Applications
- Consumer applications
- General purpose
- Household
- Containers
- Interior parts for automotive
- Packaging
Frequently asked questions
Injection at 310–360 °C, mould at 120–160 °C. Pre-drying: 4–6 hours at 150 °C. Abrasive material → wear on tools and moulds. Good flow properties. Anisotropic shrinkage (0.5–1.5 %) depending on fibre orientation.
PPS is difficult to recycle due to its high processing temperature and aromatic structure. Industrial recovery programmes exist from manufacturers. Not suitable for consumer recycling.
PPS is generally not certified for food contact. For high-temperature food contact, PEEK or PEI are preferred.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ