Le PA12 offre une excellente résistance aux carburants, huiles hydrauliques, graisses et solvants aliphatiques. Sa faible absorption d'eau lui confère une stabilité dimensionnelle supérieure aux PA6/66. Sensible aux acides forts concentrés.
PA (Polyamide) 1010 – glass fibres
PA1010+GF
PA (Polyamide) 1010 – fibres de verre
Polyamide (Nylon / PA)
Reinforced Glass fibres
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.50 to 1.76 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 7.6 to 22 kJ/m2 |
| Flexural modulus | 6400 MPa |
| Flexural resistance | 140 MPa |
| Tensile modulus | 7600 MPa |
| Tensile resistance | 120 MPa |
| Tensile strain | 3 % |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Electrical/Electronic Applications
- Industrial applications
- Consumer applications
- Household
- Technical parts
- General purpose
- Enclosures
- Sports equipment
- Connectors
Frequently asked questions
GF grades require higher injection pressures. Strongly anisotropic shrinkage (perpendicular to fibres > along axis). Increased nozzle and mould wear — nitrided steels recommended. Drying identical to base grade.
PA12 is recyclable. In selective laser sintering (SLS), used powders can be recycled up to 30–50%. Mechanical recycling is possible for injection-moulded parts.
PA12 grades are approved for food contact (FDA 21 CFR, EU Regulation 10/2011). Verify the compliance of the specific grade with the food type and temperature.
OUR MANUFACTURING LOCATIONS
OUR INDUSTRIAL SOLUTIONS
Western Europ
Asia
Eastern Europ
All rights reserved © | Hybster 2026