Acetal POM (Polyoxymethylene) Copolymer – Glass fibre
POM-C+GF
Acetal POM (Polyoxymethacrylate) Copolymer – glass fibres
Acetal (POM)
Reinforced fibreglass
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.47 to 1.64 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 2.0 to 8.8 kJ/m2 |
| Flexural modulus | 3000 to 10200 MPa ISO 178 |
| Flexural resistance | 170 MPa |
| Tensile modulus | 3100 to 9330 MPa ISO 527-1 |
| Tensile resistance | 38.0 to 131 MPa ISO 527-1, -2, Yield |
| Tensile strain | 1.9 to 4.4 % ISO 527-1, -2, Break |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Electrical/Electronic Applications
- Automotive Applications
- Gears
- General purpose
- Technical parts
- Industrial applications
- Enclosures
- Consumer applications
- Bearings
- Automotive electronics
Frequently asked questions
GF grades require higher injection pressures. Strongly anisotropic shrinkage (perpendicular to fibres > along axis). Increased nozzle and mould wear — nitrided steels recommended. Drying identical to base grade.
POM is a recyclable thermoplastic. Recycling is limited by its sensitivity to thermal degradation. Depolymerisation allows for the recovery of formaldehyde. Recycled grades exist for non-critical applications.
POM-FDA grades are approved for food contact (cold and hot water). Used in taps and kitchen equipment. Check the specific grade with the supplier.
