Le POM présente une excellente résistance aux solvants organiques, huiles, graisses et carburants. Sensible aux acides forts et bases concentrées (hydrolyse). Incompatible avec les oxydants forts. Bonne tenue en milieu humide et dans l'eau chaude.
Acetal POM (Polyoxymethylene) Copolymer – PTFE
POM-C+PTFE
Acetal POM (Polyoxymethacrylate) Copolymer – PTFE
Acetal (POM)
Reinforced PTFE
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.48 to 1.67 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 7 kJ/m2 |
| Flexural modulus | 2000 to 9930 MPa ISO 178 |
| Flexural resistance | 90 MPa |
| Tensile modulus | 2300 to 2720 MPa ISO 527-1 |
| Tensile resistance | 39.0 to 85.8 MPa ISO 527-1, -2, Break |
| Tensile strain | 1.3 to 24 % ISO 527-1, -2, Break |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Electrical/Electronic Applications
- Automotive Applications
- Gears
- General purpose
- Technical parts
- Industrial applications
- Enclosures
- Consumer applications
- Bearings
- Automotive electronics
Frequently asked questions
Injection moulding at 185–215 °C, mould temperature 80–100 °C. Highly susceptible to thermal degradation (release of formaldehyde above 230 °C). High shrinkage (1.8–2.5 %) → appropriate mould design is essential. No pre-drying required if stored correctly.
POM is a recyclable thermoplastic. Recycling is limited by its sensitivity to thermal degradation. Depolymerisation allows for the recovery of formaldehyde. Recycled grades exist for non-critical applications.
POM-FDA grades are approved for food contact (cold and hot water). Used in taps and kitchen equipment. Check the specific grade with the supplier.
OUR MANUFACTURING LOCATIONS
OUR INDUSTRIAL SOLUTIONS
Western Europ
Asia
Eastern Europ
All rights reserved © | Hybster 2026