PE, générique – titanium dioxide (equiv.)
PE
EP, generic – titanium dioxide (equivalent)
Trade Name : Generic grade
Reinforced titanium dioxide (equivalent)
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.76 to 2.22 g/cm³ ASTM D792 |
|---|---|
| Charpy notched impact | 80 kJ/m2 |
| Flexural modulus | 1000 MPa |
| Flexural resistance | 25 MPa |
| Tensile modulus | 800 MPa |
| Tensile resistance | 25 MPa |
| Tensile strain | 700 % |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Film
- General purpose
- Containers
- Packaging
- Bags
- Tanks
- Food packaging
- Industrial applications
- Soufflé film
- Plumbing
Frequently asked questions
Injection at 180–250 °C, mould at 20–60 °C. Low viscosity → good filling. High shrinkage (1.5–3.0 %) → adjustment of mould dimensions essential. Crystallisation influenced by cooling rate. No pre-drying required.
HDPE (code 2, LDPE code 4) is one of the most recycled plastics globally. Well-established collection streams. Mechanical recycling is common. The value of recycled material is significant.
PE is one of the most approved materials for food contact (FDA, EU regulation, EFSA). Widely used in food packaging, drinking water pipes (HDPE PE 100), and bottles. Excellent chemical inertness for all types of food.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ