PPE+PS+PA (Polyamide) – glass fibres
Personal protective equipment, Polystyrene, Polyamide, Glass fibre
PPE+PS+PA (Polyamide) – fibres de verre
Reinforced fibreglass
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.17 to 1.45 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 4.9 to 11 kJ/m2 |
| Flexural modulus | 3370 to 12300 MPa ISO 178 |
| Flexural resistance | 170 MPa |
| Tensile modulus | 4270 to 13900 MPa ISO 527-1 |
| Tensile resistance | 88.0 to 127 MPa ISO 527-1, -2, Yield |
| Tensile strain | 3.0 to 4.1 % ISO 527-1, -2, Yield |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Electrical/Electronic Applications
- Industrial applications
- Consumer applications
- Household
- Technical parts
- General purpose
- Enclosures
- Sports equipment
- Connectors
Frequently asked questions
GF grades require higher injection pressures. Strongly anisotropic shrinkage (perpendicular to fibres > along axis). Increased nozzle and mould wear — nitrided steels recommended. Drying identical to base grade.
PA6 is recyclable (code 7). Depolymerisation enables the recovery of caprolactam. Mechanical recycling is widely practiced in the automotive and textile industries.
PA6 grades are approved for food contact (FDA, EU regulation). Avoid contact with highly acidic or alcoholic foods. Check the specific grade.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ