PP Copolymer (Polypropylene Copolymer) – mica
PP-C+MICA
PP Copolymer (Polypropylene Copolymer) – mica
Commodity Plastics
Reinforced Mica
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 0.930 to 1.25 g/cm³ ASTM D792 |
|---|---|
| Charpy notched impact | 5 kJ/m2 |
| Flexural modulus | 1510 to 3250 MPa ASTM D790 |
| Flexural resistance | 40 MPa |
| Tensile modulus | 1100 to 3500 MPa ASTM D638 |
| Tensile resistance | 15.0 to 22.1 MPa ASTM D638, Yield |
| Tensile strain | 2.0 to 5.0 % ASTM D638, Yield |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Industrial applications
- Home appliances
- Electrical/Electronic Applications
- Consumer applications
- General purpose
- Household
- Containers
- Interior parts for automotive
- Packaging
Frequently asked questions
Injection at 200–260 °C, mould at 20–80 °C. Excellent flow properties, suitable for complex thin-walled parts. Significant shrinkage (1.0–2.5 %) must be taken into account during mould design. No pre-drying required. Take care to prevent warping of flat parts.
PP (code 5) is recyclable. Recycling streams exist for food packaging, the automotive industry, and general industry. The quality of recycled pellets is sufficient for many applications.
PP is among the most widely used food contact materials (FDA, EU Regulation 10/2011). Approved for all types of food including fatty and acidic foods. Resistant to steam sterilisation (PP random copolymer).
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ