PA (Polyamide) 66 - carbon fibres
PA66+CF
PA (Polyamide) 66 – carbon fibres
Polyamide (Nylon / PA)
Reinforced Carbon fibres
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.16 to 1.39 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 3.0 to 12 kJ/m2 |
| Flexural modulus | 11000 MPa |
| Flexural resistance | 200 MPa |
| Tensile modulus | 13300 MPa |
| Tensile resistance | 175 MPa |
| Tensile strain | 1.5 % |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Electrical/Electronic Applications
- Industrial applications
- Consumer applications
- Household
- Technical parts
- General purpose
- Enclosures
- Sports equipment
- Connectors
Frequently asked questions
CF grades require slightly higher temperatures and pressures. Very abrasive → carbide tooling is mandatory. Almost isotropic shrinkage is very low. Electrical conductivity must be taken into account in the design of parts.
PA66 is recyclable. Depolymerisation into hexamethylenediamine and adipic acid is industrially feasible. Mechanical recycling is used for automotive production waste.
PA66 can be approved for food contact for specific grades, but applications remain limited. Prefer PA6-FDA for common food applications.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ