PA (Polyamide) 6 – carbon fibres
PA6-CF
PA (Polyamide) 6 – carbon fibres
Polyamide (Nylon / PA)
Reinforced Carbon fibres
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.14 to 1.31 g/cm³ ISO 1183 |
|---|---|
| Charpy notched impact | 3.0 to 11 kJ/m2 |
| Flexural modulus | 10600 MPa |
| Flexural resistance | 190 MPa |
| Tensile modulus | 13000 MPa |
| Tensile resistance | 165 MPa |
| Tensile strain | 1.5 % |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Automotive Applications
- Electrical/Electronic Applications
- Industrial applications
- Consumer applications
- Household
- Technical parts
- General purpose
- Enclosures
- Sports equipment
- Connectors
Frequently asked questions
CF grades require slightly higher temperatures and pressures. Very abrasive → carbide tooling is mandatory. Almost isotropic shrinkage is very low. Electrical conductivity must be taken into account in the design of parts.
PA6 is recyclable (code 7). Depolymerisation enables the recovery of caprolactam. Mechanical recycling is widely practiced in the automotive and textile industries.
PA6 grades are approved for food contact (FDA, EU regulation). Avoid contact with highly acidic or alcoholic foods. Check the specific grade.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ