AES+PC (Polycarbonate)
AES-PC
AES+PC (Polycarbonate)
Polycarbonate (PC)
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.14 g/cm³ |
|---|---|
| Charpy notched impact | 40 kJ/m2 |
| Flexural modulus | 2700 MPa |
| Flexural resistance | 85 MPa |
| Tensile modulus | 2500 MPa |
| Tensile resistance | 55 MPa |
| Tensile strain | 40 % |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Electrical/Electronic Applications
- Automotive Applications
- Household
- Enclosures
- Lighting applications
- Electrical components
- Computer components
- Mobile phones
- Medical/health applications
- Industrial applications
Frequently asked questions
Injection at 230–280 °C, mould at 60–90 °C. Pre-drying essential: 4 hours at 100 °C. Susceptible to hydrolysis if damp. Low shrinkage (0.5–0.7 %). Higher injection pressure than pure ABS.
The ABS+PC alloy (code 7) is recyclable, but separation is complex. It can be re-melted, but its properties degrade if the proportions are not controlled.
The ABS+PC alloy is not certified for general food contact. For food applications, prefer PP, PETG, or PE.
OUR INDUSTRIAL SOLUTIONS All rights reserved © | Hybster 2026
OUR MANUFACTURING LOCATIONS
Western EuropAsiaEastern Europ