ABS (Acrylonitrile Butadiene Styrene) – stainless steel fibres
ABS-SF
ABS (Acrylonitrile Butadiène Styrène) – fibres inox
Acrylonitrile Butadiene Styrene (ABS)
Reinforced stainless steel fibres
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.09 to 1.51 g/cm³ ASTM D792 |
|---|---|
| Charpy notched impact | 15 kJ/m2 |
| Flexural modulus | 2400 to 6210 MPa ASTM D790 |
| Flexural resistance | 70 MPa |
| Tensile modulus | 2280 to 2780 MPa ASTM D638 |
| Tensile resistance | 37.5 to 50.3 MPa ASTM D638, Yield |
| Tensile strain | 2.0 to 4.1 % ASTM D638, Break |
Chemical resistance and characteristics
Chemical resistance
<
Recommended applications
- Electrical/Electronic Applications
- Automotive Applications
- Household
- General purpose
- Enclosures
- Interior parts for automotive
- Electrical components
- Industrial applications
- Home appliances
- Building and construction applications
Frequently asked questions
Injection at 200–260 °C, mould at 40–80 °C. Reproducible shrinkage rate (0.4–0.7 %). Recommended pre-drying: 2–4 hours at 80 °C. Avoid thermal degradation above 280 °C. Good flow, suitable for thin-walled parts.
ABS is recyclable (code 7). It can be remelted and re-injected several times with slight degradation of its properties. Industrial recycling channels exist for production waste. End-of-life recycling remains limited by selective collection.
Standard ABS is not certified for food contact. Special ABS-FDA grades exist but remain marginal. Prefer PP, PE, or PETG for common food applications.
OUR MANUFACTURING LOCATIONS
OUR INDUSTRIAL SOLUTIONS
Western Europ
Asia
Eastern Europ
All rights reserved © | Hybster 2026