Quality Scores

Mechanics

Thermal

Chemical

UV ageing

Injection moulding difficulty

Recycling

Performance profile

Mechanical properties

Propriétés mécaniques de PC (Polycarbonate)+ABS (Acrylonitrile Butadiène Styrène) – fibres de verre
Density	1.19 to 1.37 g/cm³ ISO 1183
Charpy notched impact	5.9 to 12 kJ/m2
Flexural modulus	3000 to 8230 MPa ISO 178
Flexural resistance	150 MPa
Tensile modulus	77.8 to 7620 MPa ISO 527-1
Tensile resistance	69.7 to 120 MPa ISO 527-1, -2
Tensile strain	1.0 to 6.2 % ISO 527-1, -2, Break

Chemical resistance and characteristics

Chemical resistance

ABS resists dilute acids, bases, and mineral oils. Sensitive to aromatic solvents (toluene, acetone), chlorinated hydrocarbons, and esters. Prolonged contact with greases can cause stress cracking. Not recommended in strong oxidizing environments.

Recommended applications

Electrical/Electronic Applications
Automotive Applications
Household
General purpose
Enclosures
Interior parts for automotive
Electrical components
Industrial applications
Home appliances
Building and construction applications

Frequently asked questions

Implementation — Plastic injection

Recycling & Sustainability

🍽️ Food Contact & Certifications

Hybster Team

Hybster Engineering Team

Design Office – Plastics Design & Engineering

The Hybster Design Office brings together the company's plastic engineering, mechanical, and industrialisation engineers. The team supports projects from the ideation phase through to series validation, incorporating Design For Manufacturing (DFM), rheological simulation, material selection, and mould design. It serves the automotive, electronics, electrical, EV charging, and industrial sectors.

Injection moulded part design DFM Simulation Moldflow Subject choice Moulds for conception ISO 20457 Tolerancing

Technical data sheet

Acronym	ABS
Family	Polycarbonate (PC)
Reinforced	fibreglass
Process	Injection Moulding
Standards	UL94 HB, RoHS, FDA
UL94	HB

🌡️ Thermal data

Telegram	105 °C
HDT 0.45 MPa	118 °C
Range of use	-20 °C → 105 °C
Temperature transformation	200 °C to 260 °C
Injection removal	0.2 % → 0.5 %