Quality Scores

Mechanics

Thermal

Chemical

UV ageing

Injection moulding difficulty

Recycling

Performance profile

Mechanical properties

Propriétés mécaniques de Acetal POM (Polyoxyméthacrylate) Copolymère – fibres de carbone
Density	1.43 to 1.50 g/cm³ ISO 1183
Charpy notched impact	3.0 to 7.0 kJ/m2
Flexural modulus	5940 to 16000 MPa ISO 178
Flexural resistance	190 MPa
Tensile modulus	8380 to 17300 MPa ISO 527-1
Tensile resistance	62.9 to 131 MPa ISO 527-1, -2, Break
Tensile strain	0.95 to 4.0 % ISO 527-1, -2, Break

Chemical resistance and characteristics

Chemical resistance

Le POM présente une excellente résistance aux solvants organiques, huiles, graisses et carburants. Sensible aux acides forts et bases concentrées (hydrolyse). Incompatible avec les oxydants forts. Bonne tenue en milieu humide et dans l'eau chaude.

Recommended applications

Electrical/Electronic Applications
Automotive Applications
Gears
General purpose
Technical parts
Industrial applications
Enclosures
Consumer applications
Paliers / roulements
Électronique automobile

Frequently asked questions

Implementation — Plastic injection

Recycling & Sustainability

🍽️ Food Contact & Certifications

Hybster Team

Hybster Engineering Team

Design Office – Plastics Design & Engineering

The Hybster Design Office brings together the company's plastic engineering, mechanical, and industrialisation engineers. The team supports projects from the ideation phase through to series validation, incorporating Design For Manufacturing (DFM), rheological simulation, material selection, and mould design. It serves the automotive, electronics, electrical, EV charging, and industrial sectors.

Injection moulded part design DFM Simulation Moldflow Subject choice Moulds for conception ISO 20457 Tolerancing

Technical data sheet

Acronym	POM-C-CF
Family	Acetal (POM), Thermoplastiques techniques
Reinforced	carbon fibres
Process	Injection Moulding
Standards	UL94 HB, RoHS, FDA
UL94	HB

🌡️ Thermal data

Telegram	-60 °C
Tm	165 °C
HDT 0.45 MPa	135 °C
Range of use	-40 °C → 120 °C
Temperature transformation	185 °C → 215 °C
Injection removal	0.1 % → 0.3 %