ABS resists dilute acids, bases, and mineral oils. Sensitive to aromatic solvents (toluene, acetone), chlorinated hydrocarbons, and esters. Prolonged contact with greases can cause stress cracking. Not recommended in strong oxidizing environments.
ABS (Acrylonitrile Butadiene Styrene) Alloy
ABS
ABS (Acrylonitrile Butadiène Styrène) Alliage
Acrylonitrile Butadiene Styrene (ABS)
← All Materials
Injection Moulding
Transparent Food Contact Recycled Biobased flame-retardant UV resistant
✓ This material meets the criteria ~ Specialized grades may meet this criteria
Quality Scores
Mechanics
Thermal
Chemical
UV ageing
Injection moulding difficulty
Recycling
Performance profile
Mechanical properties
| Density | 1.05 g/cm³ |
|---|---|
| Charpy notched impact | 15 kJ/m2 |
| Flexural modulus | 2400 MPa |
| Flexural resistance | 70 MPa |
| Tensile modulus | 2300 MPa |
| Tensile resistance | 45 MPa |
| Tensile strain | 15 % |
Chemical resistance and characteristics
Chemical resistance
Recommended applications
- Electrical/Electronic Applications
- Automotive Applications
- Household
- General purpose
- Enclosures
- Interior parts for automotive
- Electrical components
- Industrial applications
- Home appliances
- Building and construction applications
Frequently asked questions
Injection at 200–260 °C, mould at 40–80 °C. Reproducible shrinkage rate (0.4–0.7 %). Recommended pre-drying: 2–4 hours at 80 °C. Avoid thermal degradation above 280 °C. Good flow, suitable for thin-walled parts.
ABS is recyclable (code 7). It can be remelted and re-injected several times with slight degradation of its properties. Industrial recycling channels exist for production waste. End-of-life recycling remains limited by selective collection.
Standard ABS is not certified for food contact. Special ABS-FDA grades exist but remain marginal. Prefer PP, PE, or PETG for common food applications.
OUR MANUFACTURING LOCATIONS
OUR INDUSTRIAL SOLUTIONS
Western Europ
Asia
Eastern Europ
All rights reserved © | Hybster 2026