Matières plastiques - PP – Polypropylène Homopolymère (Injection) - Hybster

APPLICATIONS

Food / packaging / Outdoor applications / Automotive / Building / Heating / sanitary / Connectors / Electricity - Electronics / Household appliances / Sealing / Retail / Garden / exterior / Games and toys / Exterior parts / Interior parts / Under bonnet applications / Technical and industrial parts / Sport / Universal

Avantages et inconvénients PP – Polypropylène Homopolymère (Injection)

features

Le polypropylène (PP) est un matériau économique offrant une combinaison d’excellent physical, mechanical, thermal and electrical properties which are not found in any other thermoplastic. Compared to low or high density polyethylene, it has lower impact strength, but higher working temperature and higher tensile strength.

L’homopolymère de polypropylène homopolymère (PPH) est le plus utilisé. Le PPH offre un good strength to weight ratio and is stiffer than copolymer. These advantages combined with good chemical resistance and weldability make it an ideal material for many corrosion resistant structures.

Technical datasheet PP – Polypropylène Homopolymère (Injection)

Avantages Polypropylène PP Homopolymère

Chemical
Fire behaviour: HB
Fire behaviour: V0
Comportement au feu : V1
Comportement au feu : V2
Standard density
Low thicknesses (<1mm)
Recyclable
Recycled
Acid resistance
Resistance to alcohols
Dimensional stability: Good

inconvénients Polypropylène PP Homopolymère

Resistance à la chaleur : Moyenne
UV resistance: Poor
UV resistance: Medium
Chemical resistance: Medium

Properties

Tensile modulus

Tensile strength (breakage)

Bending modulus

Charpy impact resistance, +23°C

Shore D hardness

Softening temperature Vicat

Yellow Card available

Transverse resistivity

Surface resistivity

Absorption d'eau

UV resistance

Mini

990

Post meta

1800

Yes

5.5 to 1.1E+16 ohms

1.0E+3 to 7.5E+14 ohms

0.010 to 0.11 %

Average

Maxi

4500

Post meta

9500

120

Unit

Mpa

kJ/m2

°C

Ohm*m

Ohm

Standard

ISO 527-1/-2

ISO 178

ISO 179/1eU

ISO 7619-1

ISO 306

IEC 62631-3-1

IEC 62631-3-2

ISO 62

Polypropylène PP Homopolymère

Plastic Material

PP – Polypropylène Homopolymère (Injection)